| Synchronous Parallel
Interface (SPI) |
 |
Connector Type: DB-25S female connector |
|
Signal Level: EIA/TIA-644 (LVDS) |
|
Input Impedance: 100 ohms |
|
Standards: DVB-PI-232 TM 1449/EN 50083 Part
9 |
Asynchronous Serial Interface (ASI) |
|
Connector Type: Dual BNC |
|
Signal Level: -40 to 0 dB |
|
Input Impedance: 75 ohms or Hi-Z pass through |
|
Standards: MPEG-2 ISO/IEC 13818-1, ANSI X3T11/Levels
FC-1 and FC-0 |
SMPTE-310M |
|
Connector Type: Dual BNC |
|
Input Impedance: 75 ohms |
|
Standards: SMPTE-310M/IEC 60169-9 |
DVStation-Pod (QPSK) |
|
Connector Type: F connector |
|
Input signal: 950 to 2150 MHz QPSK signal |
|
Symbol Rate: 3 to 30 Mbaud |
|
Code rate (Viterbi): 1/2, 2/3, 3/4, 5/6, 7/8 |
|
Power level -25 to -65 dBm |
DVStation-Pod (COFDM) |
|
Connector Type: BNC |
|
Input Impedance: 75 ohms |
|
RF Power Level: -15 to -85 dBm |
|
Tuner Center Frequency Range: VHF 174 to 230
MHz, UHF 470 to 862 MHz |
|
Tuner Channel Bandwidth: 7 or 8 MHz |
DVStation-Pod (ATM) |
|
Connector Type: SC (Optical) |
|
Wavelength Range: 1200nm - 1600nm |
|
Input Power Level: -36dBm to 0 dBm |
|
Bit Rate: 155.52 Mbps |
|
Framing: OC-3c (SONET) / STM-1 (SDH) |
|
ATM Adaptation Layer: AAL-1 / AAL-5 |
|
Network Interface: UNI 3.1 (PVC) |
DVStation-Pod (QMM) |
|
Connector Type: Dual BNC |
|
Input Signal: 270 Mb/s serial component digital video |
|
Standards: ITU-R BT.601, BT.655, SMPTE 259M |
DVStation-Pod (AMM) |
|
Connector Type: Dual BNC |
|
Input Signal: 270 Mb/s serial component digital video |
|
Standards: ITU-R BT.601, BT.655, SMPTE 259M |
System Requirements |
|
Intel Pentium III, 1 GHz or faster processor |
|
384 Mbyte of RAM |
|
1.2 Gbyte of available hard-disk space |
|
Ethernet interface |
|
Windows XP Professional or Windows 2000 Professional |
